Hello everyone! <3
☆*:.｡. o(≧▽≦)o .｡.:*☆
Kaye - sensei here! (๑>ᴗ<๑)
Sorry for the lack of posts lately, been very busy with Kawaii In Manila 2 last September 6 2014! :) Well, now I'm back and here's a tutorial on how to use the Kutsuwa Eraser DIY Kit from Japan! <3
Okay, Let's Start! ヾ(｡･ω･｡)
This is how it looks, the packaging is so kawaii ! o(≧∇≦o)
Here's what's inside this kawaii packaging!
1 mold <3 (Cake mold, Strawberrry mold, Icing mold, leaf mold, sliced cake mold )
4 different colored clays
( Red, Yellow, Blue and White )
What you will need:
(≧∇≦)/ Let's start making Kawaii erasers! ♥
First, get some water, and sprinkle some on the mold :)
This will not make the clay stick to the molds. (~˘▾˘)~
Then, get some white clay, and roll it into a circle ♥ Put it on the cake mold on the upper left.
After putting the clay into the mold, press it with the other molder, like this <3
Use the toothpick to remove the excess clay.
And, tadaa. this is the first layer of your cake. You need 2 of this, so repeat the instructions to make the another layer.
To make the Pink layer of your cake, mix the red and white clay. Remember to use only a small amount of red clay.
Repeat the steps again :)
And put the 3 layers of your cake, and tadaaaa!
Here's your finished cake!
It's time to decorate your cake!
Use your molders to decorate your cake. This is very easy you just need to repeat the steps over and over again! haha
Don't forget to sprinkle water on your molders.
And this is how you make the sliced cake :)
And this is for the chocolate Cake.
After finishing designing your cakes, It's now for you to bake them!
I don't have an oven, so I didn't baked mine, haha. But you need to bake them to turn them into an eraser! Yay. (≧∇≦)/
Use the white box included in the packaging in baking them, put them inside and start baking for 2 - 5 minutes! :)
Put water inside the white container with the cake inside, half of the container should be filled with water.
Don't put multiple Cakes in the microwave at the same time. It has to be one by one.
(If you boil all of them at once, eraser dough would stick together.)
You need to put it in cold water for 3 minutes after you take it out of the microwave.
PS. You can reuse the water! <3
And this is for your cake's packaging. :) It's included on the lower right of the Instruction paper.
All you need to do is cut them and glue them!
And tadaaa, here's your cake erasers from the Kutsuwa Eraser DIY Kit! <3
PS. Cakes are not edible :P
I hope you like this tutorial! (๑>◡<๑)